|
Selecon Rama 150 PC |
|
|
 |
| Rama
150 PC |
|
The Selecon
Rama 150 PC is a general purpose 1000W / 1200W theatre PC
with an industry standard 150mm (6 inch) plano-convex lens.
The beam is adjustable from a spot of 5 degrees to flood of
60 degrees with a soft edge that is crisper than a fresnel
but still easy to blend with adjacent beams to provide even
illumination. Access for relamping is via a swing down bottom
that is fitted with a cut-out switch for safety. The beam
shape can be controlled using a four-leaf rotatable barn door
accessory. |
|
|
Beam adjustment
is achieved by loosening the focus knob and sliding the lamp
and reflector in relation to the fixed PC lens. The "posi-slide"
focusing mechanism minimises any vibration of the lamp. |
|
|
|
|
|
 |
| Rama
150 FT PC |
|
The Selecon
Rama 150 FT PC has the same features as the Rama 150 PC but
with the addition of Selecon's innovative "Fast Focus
Technology" (patents pending) to reduce focus time. Grip
and twist for fast, precise, pan adjustment. Squeeze and slide
for fast, precise, focus adjustment. Twist and tilt for fast,
precise, tilt adjustment. No tools required! |
|
|
|
|
Features |
- Beam angle adjustable
from 5 to 60 degrees
- FT model provides
"Fast Focus Technology". No tools required!
- Selecon "posi-slide"
focusing mechanism
- Tilt and focus
scales in real degrees for faster focusing
- FT model has pan,
tilt and focus scales in real degrees for faster focusing
- Lamp wattage 1000
Watts or 1200 Watts
- Useful throw distances
from 4 to 18 metres
- Lamphouse bottom
opens for maintenance
- Safety switch isolates
mains when bottom open
- Built-in retaining
clip for colour frame
- Built-in safety
bond rated for the luminaire
- Redesigned barndoor
accessory
- Adjustable yoke
balance point
- Compliant with
CE safety requirements
|
|
|
Detailed
Features |
|
The tilt and
focus scales are marked in real degrees to enable fast, accurate,
adjustment of the luminaire. The pan adjustment on FFT luminaires
also is marked in degrees. This enables information from the lighting
designer's calculations or visualisation software to be used to
preset the luminaire focus on the ground before the lighting bars
are flown leaving only fine tuning to be done during the focus session. |
 |
|
 |
The
safety bond is built into the luminaire (left) to ensure this essential
safety aid is always on hand. When rigging, simply release the top
slide lock, pull out the wire and fit to the lighting bar. Reverse
this procedure to store the safety bond back into the luminaire. |
|
|
The "posi-slide"
focusing mechanism (right) ensures the lamp tray slides easily and
smoothly to minimise any vibration of the lamp while focusing the
luminaire. |
 |
|
|
|
|
Accessories |
 |
 |
 |
 |
| Rotatable Barndoor |
Colour Frame |
Lens Safety Mesh |
Hook Clamp |
|
|
|
|
Photometrics |
 |
|
|
Technical
Specifications |
|
|
| Beam
Angle |
Adjustable
between 5 and 60 degrees |
|
|
| Lamp
1000W Theatre |
T/19,
T/11 .. 21,500 lumens, 900 hours average life, 230-240V |
| Lamp
1000W Studio |
CP70 .........
25,000 lumens, 400 hours average life, 230-240V |
| Lamp
1200W Theatre |
T/29 ...........
27,600 lumens, 480 hours average life, 230-240V |
|
|
| Lamp
Base |
GX9.5 |
|
|
| Lens
Diameter |
150mm |
| Colour
Frame Size |
186mm
x 190mm (Fits USA Standard 7 1/2 inch square frames) |
|
|
| Construction |
Aluminium
extrusions and moulded engineering plastics |
|
|
|
|
|
Dimensions |
| |
150 |
150 FT |
| Height: |
405mm |
445mm |
| Width: |
290mm |
286mm |
| Depth: |
480mm |
480mm |
| Weight: |
6.9kg |
7.2kg |
|
 |
|
|
|
Ordering
Information |
| Description |
Order
Code |
| Luminaires |
|
| Rama
150 PC, 1200W Lamp |
SEL-RA150PC-STD |
| Rama
150 PC FFT, 1200W Lamp |
SEL-RA150PC-FFT |
| |
|
| Accessories |
|
| Rama
Barndoor Four-Leaf Rotatable |
SEL-20BDSF12 |
| Rama
Colour Frame (Spare) |
SEL-20CFSF12 |
| Rama
Lens Safety Mesh |
SEL-20SM6 |
| Hook
Clamp for 50mm Bars |
LXA-STDHC |
|
| Description |
Order
Code |
| Lamps |
|
| Lamp
1000W T/19 |
LAM-T/19 |
| Lamp
1000W CP70 |
LAM-CP70 |
| Lamp
1200W T/29 |
LAM-T/29 |
| |
|
| |
|
| |
|
| |
|
| |
|
|
|
|
Please Note: Please specify your choice of lamp at time of ordering. Luminaires are supplied complete with colour frames and safety bonds. Safety bonds are permanently fitted to the luminaires to prevent
loss and help encourage safe rigging practices. |
|
The
information presented on this page is provided by courtesy of Philips Selecon. |
|
|
| Revised: 08-Sep-2010 |
Copyright
(C) 2005 Adena Limited |